| Type | Incinerator – DBC 1.0
| | | GENERAL
| ● | Sistem | Double Chamber (Good Emission/Smokeless)
| ● | Chamber | 2 Unit/section (Round Tube Vertical Chamber)
| ● | Capacity | 1 M3/Hour
| ● | Electricity | 1.7 Kwh/ 1 ph/ 220 V
| ● | Material: |
| – | Cover Body | Mild Steel 4 mm
| ● | Panel Control | Semi & Automatic, casing stainless steel, accessories (MCB, Contractor, Ignition Lamp, Switch & Emergency)
| – | Panel Control | 20 – 24 Litre/Hour
| – | Fuel | 200 Litre
| – | Fuel Tank (Litre) | 2 Unit
| – | Oxigen Injection Blower | Stainless Steel, Ø 300 x 14.000 mm from Ground
| | | CHAMBER
| | |
| ● | First Chamber |
| – | Dimension | Ø 1600 x 1220 (H) mm
| – | Volume | ± 1.1 M3
| – | Burner | Gun Type, Riello, Made in Italy (UNI EN ISO 9001 : 2008)
| | | 1
| ● | Temperature |
| – | Temp. Service | 700 o- 1000 oC
| – | Temp. Control | Digital, TOHO, Made In Japan
| – | Temp. Sensor | Termocouple Stainless Steel Type K (Stainless Steel)
| – | Door | Swing Door with Round Lock (Clockwise), Insulated ith Gland Packing
| ● | Secondary Chamber |
| – | Dimension | Ø 700 x 900 (H) mm
| – | Volume | ± 0.15 M3
| – | Burner | Gun Type, Riello, Made in Italy (UNI EN ISO 9001 : 2008)
| | | 1
| ● | Temperature | 800 o- 1100 oC
| – | Temp. Service | Digital, TOHO, Made In Japan
| – | Temp. Control | Termocouple Stainless Steel Type K (Stainless Steel)
| – | Temp. Sensor |
| ● | Water Spray | Double Line Pressure Jet
| | System | 500 /700 x 1200 (H) mm
| | Dimension | Full Stainless Steel
| | Material | Hanger Stainless Steel Pipe, Stainless Grease Trap, Pump & Drain Pipe
| | Accessories | UNIT Complete With After Chamber & Stainless Join Stack
| Supply With : | | | |
| ● | Include CO Detector ( Measuring Instruments (0 – 999 ppm) , Accuracy (± 20% at 0 – 100 ppm, ± 15% at 100 – 500 ppm) )
| ● | Thermo-couple (2 unit) | | | |
| ● | Alat Pemadam Api Ringan (APAR), Alat Pelindung Diri (APD) | | |
| ● | Instructions Manual (bahasa Indonesia) | | |
| ● | Software aplikasi pelaporan hasil uji/pengamatan | | |
| ● | Portable Environment Device System (Khusus Tipe DBC 1.0 dan DBC 1.5) | |
| ● | Telah memperoleh sertifikat ISO 9001:2008 , ISO 14001:2004, OHSAS 18001:2007 | |
